H34L - LongRound End Cylinder
| Speed maximum | 160,000 rpm |
| Speed recommended | 120,000 rpm |
When cutting crowns and bridges the following recommendations should be observed: |
- The veneer should be cut with a diamond instrument first.
Reduce the crown metal layer gradually, which means starting the procedure from top to bottom end several times. opt. speed 120,000 - 160,000 r.p.m.,Contact pressure: 0.5 N, Please observe the working angle of 45 degrees!
Για να δείτε τα μεγέθη και τα χρώματα που διαθέτουμε πατήστε το Specification
